2021-2024 Ford Ford Bronco Upper Control Arm with Ball Joint - BDS
At the frame mounted end you'll find a pair of durometer-specific vulcanized rubber bushing preinstalled providing smooth quiet and reliable operation bolting in directly into the factory mounts. For the outer mount these UCAs use custom spec ball joints for maximum travel and all around performance. The arms will add back 1.5 degrees of caster to put the camber back within alignment spec on 2-4" of lift on base suspension Broncos and 1-3" of lift on Badlands/Sasquatch-equipped Broncos. Take your Bronco to the next level with these performance upper control arms from BDS Suspension.
- High strength 1.5-inch tubular construction improves strength and durability over stock UCA
- High angle ball joint offers maximum travel.
- Factory style rubber bushings for long lasting maintenance-free operation
- Adds caster correction for use on lifted Broncos
- Fully assembled and ready to install right out of the box
Information:
BDS UCAs will NOT work with OE Black Body struts unless they are combined with a strut spacer with a minimum height of 5/8".| Attributes | |
| Bushing Material | Rubber, Rubber |
| Bushings Included | Yes, Yes |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Construction | Tubular, Tubular |
| Control Arm Material | Steel, Steel |
| Country of Origin (Primary) | US |
| GTIN | 00840416422283 |
| Grease Fitting Included | Yes, Yes |
| Hazardous Material Code | N |
| Installation Time | 2-3 Hrs |
| Life Cycle Status Code | Available to Order |
| Lift Height | 2_3, 2_3 |
| NAFTA Preference Criterion Code | B |
| Pvg Product Status | Active |
NEW! BDS Suspension BDS123264
2021-2024 Ford Ford Bronco Upper Control Arm with Ball Joint - BDS
Product Information
- Brand: BDS Suspension
- Product Number: BDS123264